8
Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter
Driver Installation for Windows 2000
Compact USB 2.0 10/100 Network Adapter
Driver Installation for Windows 2000
1. If you haven’t already, start your computer.
2. Windows 2000 will automatically detect the Adapter connected to your computer. When the Welcome to the
Found New Hardware Wizard screen appears, insert the Driver CD into the CD-ROM drive. Then click the Next
button.
3. Select Search for a suitable driver for my device (recommended). Click the Next button.
4. Select Specify a location to find the correct driver. Click the Next button to continue.
Figure 3-5: Install Hardware Device Drivers
Figure 3-6: Locate Driver Files
NOTE: Throughout this user guide, it is assumed that “D” is the
letter of your CD-ROM drive.
NOTE: Do not click Cancel at any time during the installation
process. Doing so will prevent your driver from being properly
installed on your PC.
To Next Page
Loading...
Need help?
General
