17
Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter
Driver Installation for Windows 98
Compact USB 2.0 10/100 Network Adapter
Windows 98 Network Configuration
If you are installing the Adapter in a Windows 98 PC that is used in an NT domain, go to “Appendix B: Client for
Microsoft Setup for Windows 98.”
1. From the Windows 98 desktop, right-click the Network Neighborhood icon. Then click Properties.
2. The Network screen will appear. Click the Configuration tab.
3. Click the File and Print Sharing button. The File and Print Sharing screen will appear.
4. If you’d like others to be able to access the files on your PC’s hard drive, select I want to be able to give
others access to my files.
If you’d like to share your printer with other users on the network, select I want to be able to allow others
to print to my printer(s).
Click the OK button. File and printer sharing for Microsoft Networks should now appear in the list of installed
components.
Figure 3-21: Configuration Tab
Figure 3-22: File and Print Sharing
NOTE: Linksys does not provide technical support or
troubleshooting for network configuration.
NOTE: If you do not enable file and printer sharing,
your PC will be invisible on the network and
inaccessible to other users.
To Next Page
Loading...
Need help?
General
