23
Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
The Wireless Tab - Basic Wireless Settings
Dual-Band Wireless-N Gigabit Router with Storage Link
(use any of the characters on the keyboard). Make sure this setting is the same for all points in your wireless
network. For added security, you should change the default SSID (linksys) to a unique name.
Radio Band. For best performance in a network using Wireless-N (2.4GHz), Wireless-G and Wireless-B devices,
keep the default, Auto, and the Wide Channel and Standard Channel will be selected automatically.
Wide Channel. If you selected Wide - 40MHz Channel for the Radio Band setting, then this setting will be
available for your primary Wireless-N (2.4GHz) channel. Select any channel from the drop-down menu.
Standard Channel. Select the channel for Wireless-N (2.4 GHz), Wireless-G, and Wireless-B networking. If you
selected Wide – 40MHz Channel for the Radio Band setting, then the Standard Channel will be a secondary
channel for Wireless-N (2.4GHz).
SSID Broadcast. When wireless clients survey the local area for wireless networks to associate with, they will
detect the SSID broadcast by the Router. To broadcast the Router's SSID, keep the default setting, Enabled. If you
do not want to broadcast the Router's SSID, then select Disabled.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. For more information, click Help.
To Next Page
Loading...
Need help?
General
