Cisco MDS 9000 Series Hardware Installation Guide

CHAPTER 6
Technical Specifications
• Switch Specifications, on page 45
• Power Specifications, on page 46
Switch Specifications
The following table lists the environmental specifications for the switch:
Table 2: Environmental Specifications
SpecificationDescription
32 to 104°F (0 to 40°C)Temperature, ambient operating
-40 to 158°F (-40 to 70°C)Temperature, ambient nonoperating and storage
10 to 90%Humidity (RH), ambient (noncondensing) operating
10 to 95%Humidity (RH), ambient (noncondensing)
nonoperating and storage
-197 to 6500 ft (-60 to 2000 m)Altitude, operating
The following table lists the physical specifications for the switch:
Table 3: Physical Specifications
SpecificationDescription
1.72 x 17.3 x 18 in. (4.37 x 43.94 x 45.72 cm)
excluding PSU and fan module handles
Dimensions (HxWxD)
Chassis requires 1 RU (1.75 in. or 4.45 cm)Rack Space
21.8 lb (9.9 kg) unpopulatedWeight
1.575 x 1.575 in. (4.0 x 4.0 cm)Fan Dimensions (WxH)
1.614 x 1.602 in. (4.09 x 4.06 cm)Fan Slots Opening Dimensions (WxH)
Cisco MDS 9148V-K9 Switch Hardware Installation Guide
45

Cisco MDS 9000 Series Specifications

General

Category	Switch
Operating System	Cisco NX-OS
Ports	Varies by model
Protocols	Fibre Channel (FC), Fibre Channel over IP (FCIP), iSCSI
Redundancy	Redundant supervisors, power supplies, and fans
Management	Cisco Data Center Network Manager (DCNM), CLI, SNMP
Virtualization Support	VSANs (Virtual SANs)
Security Features	Fibre Channel Security Protocol (FC-SP)
Hot Swappable Components	power supplies, fans
Power Supply Options	AC and DC options available