Cisco MDS 9100 Series User Manual

Contents
v
Cisco MDS 9148S Multilayer Switch Hardware Installation Guide
Rack-Mounting Guidelines A-4
Before Installing the Shelf Brackets A-5
Required Equipment A-5
Installing the Shelf Bracket Kit into a Two-Post Telco Rack A-5
Installing the Shelf Bracket Kit into a Four-Post EIA Rack A-7
Installing the Switch on the Shelf Brackets A-8
Removing the Shelf Bracket Kit (Optional) A-9
APPENDIX B Technical Specifications
Switch Specifications B-1
Power Specifications B-2
General Power Supply Specifications B-2
Power Supply Requirements and Heat Dissipation Specifications B-3
Connection Guidelines for AC-Powered Systems B-3
SFP Transceiver Specifications B-3
Cisco Fibre Channel SFP Transceivers B-4
General Specifications for Cisco Fibre Channel SFP Transceivers B-4
Environmental and Electrical Specifications for Cisco Fibre Channel SFP Transceivers
B-5
Optical Specifications for Cisco CWDM SFP Transceivers B-5
APPENDIX C Cable and Port Specifications
Cables and Adapters C-1
Console Port C-2
Console Port Pinouts C-2
Connecting the Console Port to a Computer Using the DB-25 Adapter C-2
Connecting the Console Port to a Computer Using the DB-9 Adapter C-3
MGMT 10/100 Ethernet Port C-3
Supported Power Cords and Plugs C-4
Power Cords 4
Jumper Power Cord C-5
APPENDIX D Site Planning and Maintenance Records
Site Preparation Checklist D-1
Contact and Site Information D-3
Chassis and Network Information D-4

Cisco MDS 9100 Series Specifications

General

Brand	Cisco
Model	MDS 9100 Series
Category	Switch
Language	English