Cisco ME 3400 Getting Started Guide

Getting Started Guide
Cisco ME 3400 and Cisco ME 2400 Ethernet Access
Switches Getting Started Guide
INCLUDING LICENSE AND WARRANTY
1 About this Guide
2 Taking Out What You Need
3 Initial Setup
4 Managing the Switch through the CLI
5 Rack-Mounting and Switch Port Connections
6 In Case of Difficulty
7 Obtaining Documentation
8 Documentation Feedback
9 Cisco Product Security Overview
10 Product Alerts and Field Notices
11 Obtaining Technical Assistance
12 Obtaining Additional Publications and Information
13 Cisco 90-Day Limited Hardware Warranty Terms

Cisco ME 3400 Specifications

General

Category	Switch
Rack Mountable	Yes
Jumbo Frame Support	Yes
Authentication Method	RADIUS, TACACS+
RAM	128 MB
Flash Memory	32 MB
Power Device	Internal power supply
Model	ME 3400
Layer	Layer 2
MAC Address Table Size	8000 entries
Remote Management Protocol	SNMP, Telnet, SSH, HTTP, HTTPS
Features	VLAN support, IGMP snooping, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x
Memory	128 MB
Power Supply	AC 120/230 V (50/60 Hz)
Dimensions (H x W x D)	4.4 cm x 44.5 cm x 24.2 cm
Routing Protocol	Static routing