Cisco ME 3800X User Manual

Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco ME 3800X and ME 3600X Switch
Command Reference
Cisco IOS Release 15.3(1)S
November 2012
Text Part Number: OL-28238-01

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English

Summary

CHAPTER 1 Using the Command-Line Interface

CLI Command Modes

Describes the CLI command mode structure and lists the main command modes for the switch.

Global Configuration Mode

Explains how to enter global configuration mode using the configure privileged EXEC command.

Interface Configuration Mode

Details how to modify interface operations and access interface configuration mode using the interface interface-id command.

CHAPTER 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands

action

bandwidth

Configures class-based weighted fair queuing (CBWFQ) by setting output bandwidth for a policy-map class.

channel-group

Assigns an Ethernet port to an EtherChannel group in interface configuration mode.

errdisable detect cause

Enables error-disabled detection for specific or all causes in global configuration mode.

ip address

Sets an IP address for a Layer 2 switch, SVI, or routed port in interface configuration mode.

mac access-group

policy-map

shutdown

spanning-tree bpduguard

switchport

vlan

APPENDIX A Cisco ME 3800X and ME 3600X Switch Boot Loader Commands

boot

reset

APPENDIX B Cisco ME 3800X and ME 3600X Switch Debug Commands