Cisco ME 3800X User Manual

B-32
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug sw-vlan ifs
debug sw-vlan ifs
To enable debugging of the VLAN manager IOS file system (IFS) error tests, use the debug sw-vlan ifs
command in privileged EXEC mode. To disable debugging, use the no form of this command.
debug sw-vlan ifs {open {read | write} | read {1 | 2 | 3 | 4} | write}
no debug sw-vlan ifs {open {read | write} | read {1 | 2 | 3 | 4} | write}
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug sw-vlan ifs command is the same as the no debug sw-vlan ifs command.
When selecting the file read operation, Operation 1 reads the file header, which contains the header
verification word and the file version number. Operation 2 reads the main body of the file, which
contains most of the domain and VLAN information. Operation 3 reads type length version (TLV)
descriptor structures. Operation 4 reads TLV data.
Related Commands
open {read | write} Displays VLAN manager IFS file-open operation debug messages. The
keywords have these meanings:
• read—Display VLAN manager IFS file-read operation debug messages.
• write—Display VLAN manager IFS file-write operation debug messages.
read {1 | 2 | 3 | 4} Displays file-read operation debug messages for the specified error test (1, 2,
3, or 4).
write Displays file-write operation debug messages.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.
show vlan Displays the parameters for all configured VLANs or one VLAN (if the
VLAN name or ID is specified) in the administrative domain.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English