Cisco ME 3800X User Manual

B-10
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug lacp
debug lacp
To enable debugging of Link Aggregation Control Protocol (LACP) activity, use the debug lacp
command in privileged EXEC mode. To disable debugging, use the no form of this command.
debug lacp [all | event | fsm | misc | packet]
no debug lacp [all | event | fsm | misc | packet]
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug lacp command is the same as the no debug lacp command.
Related Commands
all (Optional) Displays all LACP debug messages.
event (Optional) Displays LACP event debug messages.
fsm (Optional) Displays LACP finite state-machine debug messages.
misc (Optional) Displays miscellaneous LACP debug messages.
packet (Optional) Displays LACP packet debug messages.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.
show lacp Displays LACP channel-group information.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English