Cisco ME 3800X User Manual

-158
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show vlan filter
show vlan filter
To display information about all VLAN filters or about a particular VLAN or VLAN access map, use
the show vlan filter command in privileged EXEC mode.
show vlan filter [access-map name | vlan vlan-id] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show vlan filter command:
Switch# show vlan filter
VLAN Map map_1 is filtering VLANs:
20-22
Related Commands
access-map name (Optional) Displays filtering information for the specified VLAN access map.
vlan vlan-id (Optional) Displays filtering information for the specified VLAN. The range
is 1 to 4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show vlan access-map Displays information about a particular VLAN access map or for all
VLAN access maps.
vlan access-map Creates a VLAN map entry for VLAN packet filtering.
vlan filter Applies a VLAN map to one or more VLANs.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English