Cisco ME 3800X User Manual

B-6
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug interface
debug interface
To enable debugging of interface-related activities, use the debug interface command in privileged
EXEC mode. To disable debugging, use the no form of this command.
debug interface {interface-id | null interface-number | port-channel port-channel-number |
vlan vlan-id}
no debug interface {interface-id | null interface-number | port-channel port-channel-number |
vlan vlan-id}
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines If you do not specify a keyword, all debug messages appear.
The undebug interface command is the same as the no debug interface command.
Related Commands
interface-id Displays debug messages for the specified physical port, identified by type
switch number/module number/ port, for example gigabitethernet 0/2.
null interface-number Displays debug messages for null interfaces. The interface-number is always
0.
port-channel
port-channel-number
Displays debug messages for the specified EtherChannel port-channel
interface. The port-channel-number range is 1 to 26.
vlan vlan-id Displays debug messages for the specified VLAN. The vlan-id range is 1 to
4094.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.
show interface Displays interface status and configuration information.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English