-45
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show diagnostic
show diagnostic
To display the online diagnostic test results and the supported test suites, use the show diagnostic
command in user EXEC mode.
show diagnostic content [ | {begin | exclude | include} expression]
show diagnostic detail [ | {begin | exclude | include} expression]
show diagnostic post [ |{begin | exclude | include} expression]
show diagnostic result [test {name | test-id | test-id-range | all}] [detail] [ | {begin | exclude |
include} expression]
show diagnostic schedule [ | {
begin | exclude | include} expression]
show diagnostic status [ | {begin | exclude | include} expression]
Syntax Description
Defaults This command has no default setting.
Command Modes User EXEC
content Displays test information including the test ID, the test attributes, and the
supported coverage test levels for specific tests and for switches.
detail Displays detailed test results.
post Displays the power-on self-test (POST) results.
result Displays the diagnostic test results.
test (Optional) Specifies the test results to display:
• name—Enter the name of the diagnostic test to display results only for this
test.
• test-id—Enter the test ID number to display results only for this test. The
test ID can be from 1 to 6.
• test-id-range—Enter the range of test ID numbers to display results only
for these tests.
• all—Enter this keyword to display results for all the tests.
detail (Optional) Displays the detailed test results.
schedule Displays the scheduled diagnostic tests.
status Display the running diagnostic tests.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
To Next Page
Loading...
Need help?
General
