Cisco ME 3800X User Manual

-26
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show access-lists
show access-lists
To display access control lists (ACLs) configured on the switch, use the show access-lists command in
privileged EXEC mode.
show access-lists [name | number | hardware counters | ipc] [ | {begin | exclude | include}
expression]
Syntax Description
Note Though visible in the command-line help strings, the rate-limit keywords are not supported.
Command Modes Privileged EXEC
Command History
Usage Guidelines The switch supports only IP standard and extended access lists. Therefore, the allowed numbers are only
1 to 199 and 1300 to 2699.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
name (Optional) Name of the ACL.
number (Optional) ACL number. The range is 1 to 2699.
hardware counters (Optional) Displays global hardware ACL statistics for switched and
routed packets.
ipc (Optional) Displays Interprocess Communication (IPC) protocol
access-list configuration download information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English