Cisco ME 3800X User Manual

2-126
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
ip ssh
ip ssh
To configure the switch to run Secure Shell (SSH) Version 1 or SSH Version 2, use the ip ssh global
configuration command. To return to the default setting, use the no form of this command.
ip ssh version [1 | 2]
no ip ssh version [1 | 2]
This command is available only when your switch is running the cryptographic (encrypted) software
image.
Syntax Description
Defaults The default version is the latest SSH version supported by the SSH client.
Command Modes Global configuration
Command History
Usage Guidelines If you do not enter this command or if you do not specify a keyword, the SSH server selects the latest
SSH version supported by the SSH client. For example, if the SSH client supports SSHv1 and SSHv2,
the SSH server selects SSHv2.
The switch supports an SSHv1 or an SSHv2 server. It also supports an SSHv1 client. For more
information about the SSH server and the SSH client, see the software configuration guide for this
release.
A Rivest, Shamir, and Adelman (RSA) key pair generated by an SSHv1 server can be used by an SSHv2
server and the reverse.
You can verify your settings by entering the show ip ssh or show ssh privileged EXEC command.
Examples This example shows how to configure the switch to run SSH Version 2:
Switch(config)# ip ssh version 2
Related Commands
1 (Optional) Configures the switch to run SSH Version 1 (SSHv1).
2 (Optional) Configures the switch to run SSH Version 2 (SSHv1).
Release Modification
12.2(52)EY This command was introduced.
Command Description
show ip ssh Displays if the SSH server is enabled and displays the version and
configuration information for the SSH server.
show ssh Displays the status of the SSH server.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English