Cisco ME 3800X User Manual

-29
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show archive status
show archive status
To display the status of a new image being downloaded to a switch with the HTTP or the TFTP protocol,
use the show archive status command in privileged EXEC mode.
show archive status [ |{begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines If you use the archive download-sw privileged EXEC command to download an image to a TFTP server,
the output of the show archive status command shows the status of the download.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples These are examples of output from the show archive status command:
Switch# show archive status
IDLE: No upgrade in progress
Switch# show archive status
LOADING: Upgrade in progress
Switch# show archive status
EXTRACT: Extracting the image
Switch# show archive status
VERIFY: Verifying software
Switch# show archive status
RELOAD: Upgrade completed. Reload pending
Related Commands
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.
Command Description
archive download-sw Downloads a new image from a TFTP server to the switch.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English