Cisco ME 3800X User Manual

-94
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show location
show location
To display location information for a Link Layer Discovery Protocol (LLDP) endpoint, use the show
location command in user EXEC mode.
show location admin-tag | [ | {begin | exclude | include} expression]
show location civic-location {identifier id number | interface interface-id | static} | [ | {begin |
exclude | include} expression]
show location elin-location {identifier id number | interface interface-id | static} | [ | {begin |
exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Use the show location command to display location information for an endpoint.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
admin-tag Displays administrative tag or site information.
civic-location Displays civic location information.
elin-location Displays emergency location information (ELIN).
identifier id Specifies the ID for the civic location or the elin location. The id range
is 1 to 4095.
interface interface-id
Displays location information for the specified interface or all
interfaces. Valid interfaces include physical ports.
static Displays static configuration information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English