Cisco ME 3800X User Manual

2-217
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
port-type
port-type
To configure the port type on a Cisco ME switch, use the port-type command in interface configuration
mode. Since all ports are network node interfaces (NNIs), this command has no effect.
port-type {eni | nni | uni}
no port-type
Syntax Description
Defaults All ports are NNIs
Command Modes Interface configuration
Command History
Usage Guidelines All ports on the switch are NNIs. This command has no effect.
Related Commands
eni Enhanced network interface.
nni Network node interface.
uni User network interface.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show port-type Displays the port type of an interface.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English