Cisco ME 3800X User Manual

B-9
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug ip igmp snooping
debug ip igmp snooping
To enable debugging of Internet Group Management Protocol (IGMP) snooping activity, use the debug
igmp snooping command in privileged EXEC mode. To disable debugging, use the no form of this
command.
debug ip igmp snooping [ip_address | group | management | querier | redundancy | router |
timer]
no debug ip igmp snooping [ip_address | group | management | querier | redundancy | router |
timer]
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug ip igmp snooping command is the same as the no debug ip igmp snooping command.
Related Commands
ip_address IPv4 group address
group (Optional) Displays IGMP snooping group activity debug messages.
management (Optional) Displays IGMP snooping management activity debug messages.
querier (Optional) Displays IGMP snooping querier debug messages.
redundancy (Optional) Displays IGMP snooping redundancy events.
router (Optional) Displays IGMP snooping router activity debug messages.
timer (Optional) Displays IGMP snooping timer event debug messages.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show debugging Displays information about the types of debugging that are enabled.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English