A-2
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix A Cisco ME 3800X and ME 3600X Switch Boot Loader Commands
arp
arp
To display the contents the Address Resolution Protocol (ARP) table, use the arp command in boot
loader mode.
arp [ip_address]
Syntax Description
Command Modes Boot loader
Command History
Usage Guidelines The ARP table has the IP-address-to-MAC-address mappings.
Examples This example shows how to display the ARP table:
Switch: arp 172.20.136.8
arp'ing 172.20.136.8...
172.20.136.8 is at 00:1b:78:d1:25:ae, via port 0
ip_address (Optional) Show the ARP table or the mapping for a specific IP address.
Release Modification
12.2(52)EY This command was introduced.
To Next Page
Loading...
Need help?
General
