Cisco ME 3800X User Manual

B-13
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug matm move
debug matm move
To enable debugging of MAC address-table move message processing, use the debug matm move
command in privileged EXEC mode. To disable debugging, use the no form of this command.
debug matm move [address | update]
no debug matm move [address | update]
Syntax Description
Defaults Debugging is disabled. update
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug matm move command is the same as the no debug matm move command.
Related Commands
address Displays MAC address table move address debug messages.
move Displays MAC address table move update debug messages.
Release Modification
12.2(52)EY This command was introduced.
Command Description
mac address-table
move update
Configures the MAC address-table move update feature on the switch.
show debugging Displays information about the types of debugging that are enabled.
show mac
address-table move
update
Displays the MAC address-table move update information on the switch.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English