Cisco ME 3800X User Manual

B-33
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix B Cisco ME 3800X and ME 3600X Switch Debug Commands
debug sw-vlan notification
debug sw-vlan notification
To enable debugging of the activation and deactivation of VLAN IDs, use the debug sw-vlan
notification command in privileged EXEC mode. To disable debugging, use the no form of this
command.
debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange | linkchange |
modechange | statechange}
no debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange |
linkchange | modechange | statechange}
Syntax Description
Note Though visible in the command-line help strings, the pruningcfgchange keyword is not supported.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug sw-vlan notification command is the same as the no debug sw-vlan notification
command.
accfwdchange Displays debug messages for VLAN manager notification of aggregated
access interface spanning-tree forward changes.
allowedvlancfgchange Displays debug messages for VLAN manager notification of changes to the
allowed VLAN configuration.
fwdchange Displays debug messages for VLAN manager notification of spanning-tree
forwarding changes.
linkchange Displays debug messages for VLAN manager notification of interface
link-state changes.
modechange Displays debug messages for VLAN manager notification of interface mode
changes.
statechange Displays debug messages for VLAN manager notification of interface state
changes.
Release Modification
12.2(52)EY This command was introduced.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English