Cisco ME 3800X User Manual

-137
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show rep topology
show rep topology
To display Resilient Ethernet Protocol (REP) topology information for a segment or for all segments,
including the primary and secondary edge ports in the segment., use the show rep topology command
in user EXEC mode.
show rep topology [segment segment_id] [archive] [detail] [ | {begin | exclude | include}
expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines In the show rep topology command output, ports configured as edge no-neighbor are designated with
an asterisk (*) in front of Pri or Sec. In the output of the show rep topology detail command,
No-Neighbor is spelled out.
The output of this command is also included in the show tech-support privileged EXEC command
output.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is a sample output from the show rep topology segment privileged EXEC command:
Switch # show rep topology segment 1
REP Segment 1
BridgeName PortName Edge Role
---------------- ---------- ---- ----
sw1_multseg_3750 Gi1/1/1 Pri Alt
sw3_multseg_3400 Gi0/13 Open
sw3_multseg_3400 Gi0/14 Alt
sw4_multseg_3400 Gi0/13 Open
sw4_multseg_3400 Gi0/14 Open
sw5_multseg_3400 Gi0/13 Open
segment-id (Optional) Displays REP topology information for the specified segment. The ID
range is from 1 to 1024.
archive (Optional) Displays the previous topology of the segment. This keyword can be
useful for troubleshooting a link failure.
detail (Optional) Displays detailed REP topology information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English