Cisco ME 3800X User Manual

A-10
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix A Cisco ME 3800X and ME 3600X Switch Boot Loader Commands
flash_init
flash_init
To initialize the flash file system, use the flash_init command in boot loader mode.
flash_init
Syntax Description This command has no arguments or keywords.
Defaults The flash file system is automatically initialized during normal system operation.
Command Modes Boot loader
Command History
Usage Guidelines During the normal boot process, the flash file system is automatically initialized.
Use this command to manually initialize the flash file system. For example, you use this command
during the recovery procedure for a lost or forgotten password.
Release Modification
12.2(52)EY This command was introduced.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English