Cisco ME 3800X User Manual

-43
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show controllers utilization
show controllers utilization
To display bandwidth utilization on the switch or specific ports, use the show controllers utilization
command in user EXEC mode.
show controllers [interface-id] utilization [ | {begin | exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show controllers utilization command.
Switch> show controllers utilization
Port Receive Utilization Transmit Utilization
Gi0/1 0 0
Gi0/2 0 0
Gi0/3 0 0
Gi0/4 0 0
Gi0/5 0 0
Gi0/6 0 0
Gi0/7 0 0
Gi0/8 0 0
Gi0/9 0 0
Gi0/10 0 0
Gi0/11 0 0
Gi0/12 0 0
Gi0/13 0 0
Gi0/14 0 0
Gi0/15 0 0
Gi0/16 0 0
Gi0/17 0 0
Gi0/18 0 0
Gi0/19 0 0
Gi0/20 0 0
Gi0/21 0 0
Gi0/22 0 0
Gi0/23 0 0
interface-id (Optional) ID of the switch interface.
| begin (Optional) Display begins with the line that matches the specified expression.
| exclude (Optional) Display excludes lines that match the specified expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.

Cisco ME 3800X Specifications

General

Brand	Cisco
Model	ME 3800X
Category	Switch
Language	English