15
Use the tab on the bracket and the Phillips flat-head screw to attach the short side of each bracket to
the Cisco ME 3400G-2CS switch in this mounting position:
Rack-Mount the Switch
This figure shows how to rack-mount all but the Cisco ME 3400G-2CS switch. Use the black
Phillips machine screw to attach the cable guide to the left or right bracket. Use the four number-12
Phillips machine screws to attach the brackets to the rack. See the next illustration for the
Cisco ME 3400G-2CS switch rack-mounting instructions.
SYST
CONSOLE
1
2
3
4
C
isco M
E
3400
S
E
R
IE
S
191022
To Next Page
Loading...
