Z3/Z3C Series Hardware Installation Guide
About this Guide
This guide provides instruction on how to install and configure your Z3/Z3C series device. This guide also provides
mounting instructions and limited troubleshooting procedures. For more Z-series device installation guides, refer to the
Z-series installation guides section on our documentation website.
Product Overview
The Cisco Meraki Z-Series teleworker gateway is an enterprise class firewall, VPN gateway and router. Each model
offers wireless for connectivity, five gigabit ethernet ports, including a built-in PoE-enabled port for VoIP phones and
other powered devices. Each model is designed to securely extend the power of Meraki cloud managed networking to
almost any location. With a built-in LTE modem, the Z3C simplifies any deployment that requires a backup cellular
uplink, or is positioned in a remote location.
Features
• Managed via Cisco Meraki Dashboard
• Automatic Firmware upgrades
• Automatic WAN Failover to Cellular Uplink
• L3/L7 Stateful Firewall
• 1:1 and 1:Many NAT
• Configurable VLANs / DHCP support
1
To Next Page
Need help?
General
