Cisco NCS 1001 Configuration Guide

2
Communication between the router and the application happens by SSH on Netconf. Enable Netconf on
the router on a suitable port.
3
From the client application, connect to the router using Netconf on SSH. Run Netconf operations to make
configuration changes or get operational data.
Figure 4: Lane Diagram to show the router and client application operations
Enabling Netconf
This task enables Netconf over SSH.
Data Models Configuration Guide for Cisco NCS 1001
10
Using Data models
Enabling Netconf

Cisco NCS 1001 Specifications

General

Brand	Cisco
Model	NCS 1001
Category	Network Hardware
Language	English