Cisco NCS 1001 - Display Parameters of OTS OCH Controllers

DescriptionParameter
<?xml version="1.0" ?>
<rpc message-id="8566" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<get>
<filter type="subtree">
<optics-oper
xmlns="http://cisco.com/ns/yang/Cisco-IOS-XR-controller-optics-oper">
<optics-ports>
<optics-port>
<name>Ots0/2/0/0</name>
<optics-info />
</optics-port>
</optics-ports>
</optics-oper>
</filter>
</get>
</rpc>
show controllers ots 0/2/0/0
Display Parameters of OTS OCH Controllers
Use the Cisco-IOS-XR-controller-optics-oper.yang YANG model to display the parameters of OTS OCH controllers.
DescriptionParameter
<?xml version="1.0" ?>
<rpc message-id="8566" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<get>
<filter type="subtree">
<optics-oper
xmlns="http://cisco.com/ns/yang/Cisco-IOS-XR-controller-optics-oper">
<optics-ports>
<optics-port>
<name>Ots-Och0/2/0/0/1</name>
<optics-info />
</optics-port>
</optics-ports>
</optics-oper>
</filter>
</get>
</rpc>
show controllers ots-och
0/2/0/0/1
Data Models Configuration Guide for Cisco NCS 1001
24
Configuring NCS 1001 Using Data Models
Display Parameters of OTS OCH Controllers