CHAPTER 4
Configuring NCS 1001 Using OpenConfig Data
Model
Openconfig is a working group of network operators which defines a set of vendor-neutral YANG data
models supporting various network functions and devices. A complete list of supported open configuration
models is available at https://github.com/openconfig.
Cisco NCS1001 supports openconfig models according to the optical transport functions available on system.
The following are the openconfig supported models:
•
Amplifier model, supported by NCS1001 EDFA modules
•
Transport Line Protection model, supported by NCS1001 PSM modules
•
Channel Monitoring model, supported by NCS1001 EDFA by means of its OCM capability.
The Openconfig platform model is a common model where all the devices are listed. The openconfig model
hierarchy is as follows:
Figure 5: Hierarchy of Cisco NCS1001
The Openconfig platform model retrieves inventory information and it's instantiation on Cisco NCS1001
contains the models defined in the following sections.
Data Models Configuration Guide for Cisco NCS 1001
27
To Next Page
Loading...
