Cisco NCS 1001 - Optical Amplifier Module

Physical Characteristics
• Width: 17.44” (442.9 mm)
• Depth: 23.64” (600.5 mm)
•
Height: 1 RU
•
Weight without power supply unit: 8.2 kg
•
Weight with two power supply units: 10.5 kg
•
Weight of AC PSU: 1.162 kg
•
Weight of Fan: 78 gms
•
Weight of control card: 1.5 kg
Optical Amplifier Module
The optical amplifier module (NCS1K-EDFA) has pre-amplifier and booster amplifier.
The optical amplifier module provides the following functionality.
•
Preamplifier (LINE-RX to COM-TX) - Single preamplifier variant, with switchable gain ranges, according
to link loss:
◦
Range # 1: 0 to 24 dB gain, Tilt control: 24 to 27 gain, with tilt uncontrolled
◦
Range # 2: 20 to 34 dB gain, Tilt control: 34 to 37 dB gain, with tilt uncontrolled
◦
23dBm output power @ COM-TX port
•
Booster amplifier (COM-RX to LINE-TX) - True variable gain booster amplifier
◦
Gain range: 1 to 20. 20 to 25 uncontrolled tilt.
◦
23dBm output power @ LINE-TX port
•
ADD/DROP OSC channel supports both 1510nm and 1610nm +/-10nm
•
OCM assesses channel presence and Gain regulation and per channel power monitoring.
Figure 5: EDFA Front View
Hardware Installation Guide for Cisco NCS 1001
5
Cisco NCS 1001 Overview
Optical Amplifier Module