Cisco NCS 1001 - LEDs in Cisco NCS 1001

DescriptionProduct ID
Network Convergence System 1001 AC power supply unit - 2KW normal operating
temperature, 600W short term high temperature
NCS1K-2KW-AC2=
Network Convergence System 1001 DC power supply unit - 2KW normal operating
temperature, 600W short term high temperature
NCS1K-2KW-DC=
Network Convergence System 1001 line system FanNCS1K1-FAN=
SSDNCS1K-SSD=
LEDs in Cisco NCS 1001
DescriptionStateLED
The unit is operating correctly.GreenSYS
The unit has one or more errors detected.Yellow
Power is not applied to the unit.Off
The unit needs attention.BlueBCN
The unit does not need attention.Off
The SFP link is up.GreenSFP
The link is down, active alarms are present
on this port, or a hardware failure has
occurred.
Yellow
The port is not provisioned by the software,
the optics module is missing, or the port does
not have power.
Off
The unit is operating correctly.GreenPSU and FAN
The unit has one or more errors detected.Red
The control card is not present or not properly
inserted.
RedOIR
The control card, BIOS, and software are
functional.
Green
Hardware Installation Guide for Cisco NCS 1001
8
Cisco NCS 1001 Overview
LEDs in Cisco NCS 1001