EasyManua.ls Logo

Cisco NCS 1002 - Page 68

Cisco NCS 1002
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en/us/support/web/tsd-cisco-worldwide-contacts.html to obtain a directory of toll-free Technical Support numbers for
your country.
MIXED-AC-DC-PTS Alarm
Default Severity: Critical (CR), Service-Affecting (SA)
Logical Objects: EQUIPMENT
The MIXED-AC-DC-PTS alarm occurs when both the AC and DC power trays are detected in the chassis.
Clear the MIXED-AC-DC-PTS Alarm
Use either the AC or DC power module.
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical
Support Website at http://www.cisco.com/c/en/us/support/index.html for more information or log into
http://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html to obtain a directory of toll-free
Technical Support numbers for your country.
MKA-LOCALLY-SECURED Alarm
Default Severity: Critical (CR) , Service-Affecting (SA)
Logical Objects: Client
The MACsec Key Agreement-Locally-Secured (MKA-LOCALLY-SECURED) alarm is raised, when MKA
session becomes locally secured, due to the loss of an active programmed peer.
A node loses its peer under the following conditions:
When the node shuts down its interface.
When the node issues no macsec command for more than 6 times.
Clear the MKA-LOCALLY-SECURED Alarm
The alarm clears after confirming the macsec configuraiton and the interface state on the nodes.
If the alarm does not get cleared, you need to report a Service-Affecting (SA) problem. Log into the Technical
Support Website at http://www.cisco.com/c/en/us/support/index.html for more information or log into
http://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html to obtain a directory of toll-free
Technical Support numbers for your country.
MKA-START-FAIL-MISSING-PSK Alarm
Default Severity: Critical (CR) , Service-Affecting (SA)
Logical Objects: Client
The MACsec Key Agreement-Start-Fail-Missing-Pre-Shared-Keys alarm is raised on the NCS 1002 interface,
when MKA session cannot start due to the application of macsec keychain that has no active keys.
Troubleshooting Guide for Cisco NCS 1002, IOS XR Release 6.3.x
58
Alarm Troubleshooting
MIXED-AC-DC-PTS Alarm

Other manuals for Cisco NCS 1002

Related product manuals