Cisco Nexus 1000V - Flowchart for Troubleshooting Modules

PurposeCommand
Displays the aggregation state for one or more port
channel interfaces.
show port-channel database [interface
port-channel channel-number]
Displays the type of load balancing in use for port
channels.
show port-channel load-balance
Displays a summary for the port channel interfaces.show port-channel summary
Displays the traffic statistics for port channels.show port-channel traffic
Displays the range of used and unused channel
numbers.
show port-channel usage
Displays information about the running configuration
of the specified Ethernet interface.
show running-config interface ethernet port/slot
Displays information about the running configuration
of the port channel.
show running-config interface port-channel
channel-number
Displays information about the running configuration
of the specified vEthernet interface.
show running-config interface vethernet
interface-number
Monitoring Port Channels
Use the following commands to monitor the port channel interface configuration:
PurposeCommand
Clears the counters.clear counters interface port-channel
channel-number
Displays input and output octets unicast packets,
multicast packets, and broadcast packets.
show interface counters [module module]
Displays input packets, bytes, and multicast and
output packets and bytes.
show interface counters detailed [all]
Displays information about the number of error
packets.
show interface counters errors [module module]
Displays information about LACP statistics.show lacp counters [interface port-channel
channel-number]
Cisco Nexus 1000V for VMware vSphere Interface Configuration Guide, Release 5.x
83
Configuring Port Channels
Monitoring Port Channels