Feature InformationReleasesFeature Name
The interface sub-group cdp
command is removed from the port
channel vPC-HM configuration
when connecting to multiple
upstream switches.
4.2(1)SV1(4)Port channel vPC-HM
Pinpoints link failure on a port
channel configured for vPC-HM.
4.2(1)SV1(4)Network State Tracking for
vPC-HM port channels
Offloading management of LACP
from the VSM to the VEMs.
4.2(1)SV1(4)VEM management of LACP
The feature lacp command is
added to enable support of LACP
port channels. Previously LACP
was enabled automatically.
4.2(1)SV1(4)Enabling the LACP port channel
function
Support for manual creation of
subgroups.
4.0(4)SV1(2)vPC-Host Mode
Support for attaching (or pinning)
a vEthernet interface to a specific
port channel subgroup.
4.0(4)SV1(2)Static Pinning
This feature was introduced.4.0(4)SV1(1)Port Channels
Cisco Nexus 1000V for VMware vSphere Interface Configuration Guide, Release 5.x
85
Configuring Port Channels
Feature History for Port Channels
To Next Page
Loading...
