Cisco Nexus 2000 Series - Cisco Nexus 2248 TP FEX

3-10
Cisco Nexus 2000 Series Hardware Installation Guide
Chapter 3 Using a Fabric Extender with a Cisco Nexus 9000 Series Switch
Cisco Nexus 2248TP FEX
Figure 3-11 SFP+ Copper Transceiver Module
Figure 3-12 identifies the major features of RJ-45 connectors, which are used for the downlink
connections.
Figure 3-12 RJ-45 Connector
Cisco Nexus 2248TP FEX
The Cisco Nexus 2248TP FEX (N2K-C2248TP) is a stackable 1-RU FEX that has 48 100/1000 Ethernet
host interfaces (downlink ports for copper RJ-45 connectors) and four 10-Gigabit Ethernet fabric
interfaces (uplink ports for copper/optical SFP+ transceivers). It requires a 19-inch (48.26-cm) rack for
its installation. Table 3-3 lists its physical characteristics.
187492
94971
1
2
RJ-45 (both ends)
1 Pin 1 2 Pin 8
Table 3-3 Physical Characteristics for the Cisco Nexus 2248TP FEX
Dimensions
Width
Depth
Height
17.3 inches (43.9 cm)
20.0 inches (50.8 cm)
1.72 inches (4.4 cm)
Weight
1
17.7 lb (8.0 kg)
1. Measured with two power supplies and one fan module installed.