EasyManua.ls Logo

Cisco Nexus 2000 Series - Ports for the Cisco Nexus 2232 PP FEX

Cisco Nexus 2000 Series
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-22
Cisco Nexus 2000 Series Hardware Installation Guide
Chapter 3 Using a Fabric Extender with a Cisco Nexus 9000 Series Switch
Cisco Nexus 2232PP FEX
The rear of the Cisco Nexus 2232PP FEX has 32 1- and 10-Gigabit Ethernet downlink SFP or SFP+
ports, eight 10-Gigabit Ethernet uplink SFP+ or FET ports, an HDMI port, and two LEDs, as shown in
Figure 3-22.
Figure 3-22 Rear View of the Cisco Nexus 2232PP Chassis
For LED descriptions, see Appendix E, “LEDs.
This section includes the following topics:
Ports for the Cisco Nexus 2232PP FEX, page 3-22
Power Supplies for the Cisco Nexus 2232PP FEX, page 3-23
Fan Tray for the Cisco Nexus 2232PP FEX, page 3-23
Transceivers Supported by the Cisco Nexus 2232PP FEX, page 3-24
Ports for the Cisco Nexus 2232PP FEX
The downlink and uplink ports are numbered from top to bottom and then from left to right as shown in
Figure 3-23.
1 Power supply 3 Power supply (blank shown)
2 Fan tray 4 Status (top) and ID (bottom) LEDs
3
2
4
239278
1
1 Status (top) and ID (bottom) LEDs 3 1- and 10-Gigabit Ethernet host ports
(copper/optical downlink ports for SFP or SFP+
transceivers) (48)
2 HDMI port 4 10-Gigabit Ethernet fabric ports (copper/optical
uplink ports for SFP+ or FET transceivers) (4)

Table of Contents

Other manuals for Cisco Nexus 2000 Series

Related product manuals