Cisco Nexus 2000 Series - Repacking the Cisco Nexus Fabric Extender for Return Shipment

4-23
Cisco Nexus 2000 Series Hardware Installation Guide
Chapter 4 Installing a Cisco Nexus Fabric Extender
Repacking the Cisco Nexus Fabric Extender for Return Shipment
Step 6 Gently slide the chassis toward you, off of the slider rails and out of the rack.
Repacking the Cisco Nexus Fabric Extender for Return Shipment
If you need to return the Cisco Nexus 2000 and 2300 Series FEX, remove the device from the rack by
following the steps in the “Removing the Cisco Nexus Fabric Extender” section on page 4-22, and
repack it for shipment. If possible, use the original packing materials and container to repack the device.
Contact your Cisco customer service representative to arrange for return shipment to Cisco.