Installing the Switch Chassis
•
Safety, page 1
•
Installation Options with Racks and Cabinets, page 2
•
Airflow Considerations, page 2
•
Installation Guidelines, page 2
•
Unpacking and Installing the Switch, page 3
•
Installing the Switch, page 4
•
Grounding the Chassis, page 8
•
Starting the Switch, page 11
Safety
Before you install, operate, or service the switch, see the Regulatory, Compliance, and Safety Information for
the Cisco Nexus 3000 and 9000 Series for important Safety Information.
Statement 1071—Warning Definition
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
Statement 1017—Restricted Area
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security.
Statement 1030—Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Cisco Nexus 9372TX ACI-Mode Switch Hardware Installation Guide
1
To Next Page
Need help?
General
