Cisco Nexus 9236C - Power Cable Specifications; AC Power Cables Supported by NX-OS Mode Switches

SpecificationCharacteristic
23 A at -48 VDCMaximum DC input current
1104 WMaximum input W
930 WMaximum output power per power supply
35 A at +35° CelciusMaximum inrush current
8 ms at 50 % loadMaximum hold-up time
12 VDCPower supply output voltage
12 VDCPower supply standby voltage
Climate Savers Platinum Efficiency (80Plus Platinum
certified)
Efficiency rating
1UForm factor
Power Cable Specifications
The following sections specify the power cables that you order and use with AC, HVAC/HVDC, and DC
power supplies.
AC Power Cables Supported by NX-OS Mode Switches
Cord Set DescriptionPower Cord Part NumberPower Type
Power Cord Jumper, C13-C14
Connectors, 6.6 feet (2.0 m)
CAB-C13-C14-2M
Power cord, C13 to C14 (recessed
receptacle), 10 A, 9.8 feet (3 m)
CAB-C13-C14-AC
Cabinet jumper power cord, 250
VAC, 10 A, C14-C13 connectors,
2.3 feet (0.7 m)
CAB-C13-CBN
250 V, 10 A, 8.2 feet (2.5 m)CAB-250V-10A-ARArgentina
250 VAC, 10 A, 3112 plug, 8.2 feet
(2.5 m)
CAB-9K10A-AUAustralia
250 V, 10 A, 6.9 feet (2.1 m)CAB-250V-10A-BRBrazil
250 VAC, 10 A, CEE 7/7 plug, 8.2
feet (2.5 m)
CAB-9K10A-EUEuropean Union
10 A, 8.2 feet (2.5 m)CAB-IND-10AIndia
Cisco Nexus 9236C NX-OS Mode Switch Hardware Installation Guide
49
System Specifications
Power Cable Specifications