Cisco Nexus 9236C - DC Power Cable Specifications; Regulatory Standards Compliance Specifications

DC Power Cable Specifications
Cord Set DescriptionPower CordPower Supply
8 AWG insulated cable (10 AWG
minimum) for each power supply
(customer supplied)UCSC-PSU-930WDC (port-side
intake airflow)
8-AWG cable with 3-pin keyed
power supply connector and three
wires (power source connection)
CAB-48DC-40A-8AWGUCS-PSU-6332-DC (port-side
exhaust airflow)
No power cord included with
switch
NO-POWER-CORDAll except Argentina, Brazil, and
Japan
Regulatory Standards Compliance Specifications
The following table lists the regulatory standards compliance for the switch.
Table 1: Regulatory Standards Compliance: Safety and EMC
DescriptionSpecification
Products should comply with CE Markings according to directives 2004/108/EC
and 2006/95/EC.
Regulatory compliance
• UL 60950-1 Second Edition
• CAN/CSA-C22.2 No. 60950-1 Second Edition
• EN 60950-1 Second Edition
• IEC 60950-1 Second Edition
• AS/NZS 60950-1
• GB4943
Safety
Cisco Nexus 9236C NX-OS Mode Switch Hardware Installation Guide
51
System Specifications
DC Power Cable Specifications