Switch and Module Weights and Quantities
QuantityWeight per UnitComponent
1Without fans or
PSUs - 16 lb
(7.26 kg)
With fans and
PSUs - 23 lb
(10.43 kg)
Cisco Nexus 93108TC-FX3P Chassis (N9K-C93108TC-FX3P)
4—
0.26 lb (0.12 kg)
Fan Module
– Port-side exhaust (blue) (NXA-FAN-35CFM-PE)
– Port-side intake (burgundy) (NXA-FAN-35CFM-PI)
2 (1 for
operations
and 1 for
redundancy)
—
3 lb (1.36 kg)
3 lb (1.36 kg)
3 lb (1.36 kg)
3.6 lb (1.63 kg)
Power Supplies
– 715-W DC port-side intake (burgundy) (NXA-PDC-715W-PI)
– 1100-W AC port-side exhaust (blue) (NXA-PAC-1100W-PE)
– 1100-W AC port-side intake (burgundy) (NXA-PAC-1100W-PI)
– 1900-W AC port-side intake (burgundy) (NXA-PAC-1900W-PI)
Transceiver and Cable Specifications
To see the transceiver specifications and installation information, see https://www.cisco.com/c/en/us/support/
interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
Switch Power Input Requirements
The following table lists the typical amount of power that the switch consumes. It also lists the maximum
amount of power that you must provision for the switch and power supply for peak conditions.
Some power supplies have capabilities that are greater than the maximum power requirements for a switch.
To determine the power consumption characteristics for the switch, use the typical and maximum requirements
that are listed in the following table.
Note
Heat Dissipation
Requirement
Maximum Power
Consumption (AC or
DC)
Typical Power
Consumption (AC or DC)
Switch
2047.285 BTUs
per hour
600 W500 WCisco Nexus 93108TC-FX3P
Cisco Nexus 93108TC-FX3P ACI-Mode Switch Hardware Installation Guide
48
System Specifications
Switch and Module Weights and Quantities
To Next Page
Loading...
