Cisco Nexus 9364C - Page 13

The following figure shows the switch features on the port side of the chassis.
Screw holes for front
mounting brackets
(four-post rack
installations)
5Beacon (BCN), Status
(STS), and Environment
(ENV) LEDs
1
Screw holes for
center-mount bracket
(two-post rack
installations)
61-/10-Gigabit SFP+ ports
(2)
2
Notch on both sides of the
chassis for locking the
power supply end of the
chassis to the bottom
support rails (four-post
rack installations).
740-/100-Gigabit QSFP28
ports (ports 1 to 48 in 4
rows of 12 ports)
3
Green colored
40-/100-Gigabit QSFP28
ports supporting MACsec
(when software support is
available) (ports 49 to 64
in 4 rows of 4 ports)
4
To determine which transceivers, adapters, and cables are supported by this switch, see the Cisco Transceiver
Modules Compatibility Information document.
The following figure shows the switch features on the power supply side of the chassis.
Cisco Nexus 9364C NX-OS Mode Switch Hardware Installation Guide
3
Overview
Overview