Cisco Nexus 9364C - DC Power Cable Specifications

PhotoCord Set DescriptionPart Number
HVDC
6.6-foot (2.0 m) cable with
Saf-D-Grid and three terminal
connectors
CAB-HVDC-3T-2M
Not applicableAll except Argentina, Brazil, and
Japan
No power cord included with
switch
NO-POWER-CORD
Table 2: HVAC/HVDC Power Cables Callout Table
Connect this end to the power supply unit.1
DC Power Cable Specifications
Cord Set DescriptionPower CordPower Supply
8 AWG insulated cable (10 AWG
minimum) for each power supply
(customer supplied)NXA-PDC-930W-PE (port-side
exhaust airflow)
NXA-PDC-930W-PI (port-side
intake airflow)
8-AWG cable with 3-pin keyed
power supply connector and three
wires (power source connection)
CAB-48DC-40A-8AWGNXA-PDC-930W-PE (port-side
exhaust airflow)
NXA-PDC-930W-PI (port-side
intake airflow)
No power cord included with
switch
NO-POWER-CORDAll except Argentina, Brazil, and
Japan
Regulatory Standards Compliance Specifications
The following table lists the regulatory standards compliance for the switch.
Cisco Nexus 9364C NX-OS Mode Switch Hardware Installation Guide
55
System Specifications
DC Power Cable Specifications