Cisco ONS 15454 SONET - DWDM Commands - Page 12

12
RTRV-OSC:[<TID>]:<AID>:<CTAG>;
Retrieves the OSC information of the NE.
Output format:
SID DATE TIME
M CTAG COMPLD
“<AID>::[RINGID=<RINGID>,][NODEID=<NODEID>,][EAST=<EAST>,][WEST=<WEST>]”
;
RTRV-OTS:[<TID>]:<AID>:<CTAG>[::::];
Retrieves the attributes (service parameters) and state of an OTS facility.
Output format:
SID DATE TIME
M CTAG COMPLD
“<AID>:RDIRN=<RDIRN>,OPTYPE=<OPTICALPORTTYPE>,[OPWR=<POWER>,]
[ILOSS=<ILOSS>,][VOAMODE=<VOAMODE>,][VOAATTN=<VOAATTN>,]
[VOAPWR=<VOAPWR>,][VOAREFATTN=<VOAREFATTN>,]
[VOAREFPWR=<VOAREFPWR>,][OSRI=<OSRI>,][AMPLMODE=<AMPLMODE>,]
[CHPOWER=<CHPOWER>,][GAIN=<GAIN>,][EXPGAIN=<EXPGAIN>,]
[REFOPWR=<REFOPWR>,][OFFSET=<OFFSET>,][REFTILT=<REFTILT>,]
[CALTILT=<CALTILT>,][ASEOPWR=<ASEOPWR>,][DCULOSS=<DCULOSS>,]
[AWGST=<AWGST>,][HEATST=<HEATST>,][NAME=<NAME>]:<PST>,[<SST>]”
;
RTRV-PM-<MOD2>:[<TID>]:<AID>:<CTAG>::[<MONTYPE>],[<MONLEV>],[<LOCN>],
<DIRECTION>,[<TMPER>],[<DATE>],[<TIME>];
Retrieves the values of performance monitoring parameters for the specified card type.
Output format:
SID DATE TIME
M CTAG COMPLD
“<AID>,[<AIDTYPE>]:<MONTYPE>,<MONVAL>,[<VLDTY>],[<LOCN>],<DIRECTION>,
[<TMPER>],[<MONDAT>],[<MONTM>]”
;
Table 1 DWDM (continued)