Cisco ONS 15454 SONET - DWDM Commands - Page 2

2
1 DWDM
Ta b l e 1 D W D M
COPY-RFILE:[<TID>]:[<SRC>]:<CTAG>::TYPE=<XFERTYPE>,[SRC=<SRC1>,]
[DEST=<DEST>,][OVWRT=<OVWRT>,][FTTD=<FTTD>];
Downloads a new software package or file from the location specified by the FTP URL.
DLT-EQPT:[<TID>]:<AID>:<CTAG>[:::];
Deletes a card from the Network Element (NE).
DLT-LNK-<MOD2O>:[<TID>]:<FROM>,<TO>:<CTAG>;
Deletes an optical link between two optical connection points.
DLT-OSC:[<TID>]:<AID>:<CTAG>;
Deletes the Optical Service Channel (OSC) group of the NE.
DLT-<PAYLOAD>:[<TID>]:<AID>:<CTAG>;
Deletes a port connection from a client port to a supported payload type.
DLT-WLEN:[<TID>]:<AID>:<CTAG>:::[CMDMDE=<CMDMDE>][:];
Deletes the provisioned wavelength (WLEN).
ED-10GIGE:[<TID>]:<AID>:<CTAG>:::[NAME=<PORTNAME>,][MACADDR=<MACADDR>]:
[<PST>],[<SST>];
Edits the 10 GBit/sec parameters for the 10GIGE port.
ED-ALS:[<TID>]:<AID>:<CTAG>:::[ALSMODE=<ALSMODE>,][ALSRCINT=<ALSRCINT>,]
[ALSRCPW=<ALSRCPW>,][:];
Edits the Automatic Laser Shutdown (ALS) attributes of an OC-N facility and all facilities that
support the ALS feature.
ED-APC:[<TID>]::<AID>::<CTAG>:::[APC-ENABLE=<APCENABLE>][:];
Edits Amplification Power Control (APC) application attributes.
ED-ESCON:[<TID>]:<AID>:<CTAG>:::[ENCAP=<ENCAP>,][CMDMDE=<CMDMDE>][:]
[<PST>[,<SST>]];
Edits the attributes for an Enterprise System Connection (ESCON) interface.
ED-EQPT:[<TID>]:<AID>:<CTAG>:::[PEERID=<PEERID>,]
[REGENNAME=<REGENNAME>,][PWL=<PWL>,][CARDMODE=<CARD_MODE>];
Edits the attributes for a given equipment slot in the NE. If the card is in an equipment slot, this
command is allowed only on the working AID.
ED-FFP-OCH::[<TID>]:<AID>:<CTAG>:::[PROTID=<PROTID>,][RVRTV=<RVRTV>,]
[RVTM=<RVTM>,][PSDIRN=<PSDIRN>][:];
Edits the provisioning for the default protection group on the DWDM port of a TXP_MR_2.5G or
TXPP_MR_2.5G card.