Cisco PenTeleData 8800 Series User Manual

CHAPTER 10
Cisco Unified Video Camera
•
Install Cisco Unified Video Camera, page 117
•
View Camera Details, page 119
•
Cisco Unified Video Camera Features, page 119
•
Camera Lens Shutter, page 120
•
Camera Preferences, page 121
•
Reset Camera, page 124
Install Cisco Unified Video Camera
The Cisco Unified Video Camera can be mounted on your Cisco Unified IP Phone 8845 or 8865, or it can be
mounted on your computer monitor. If you need help installing or positioning your camera, contact your
system administrator.
Mount Camera on Phone
Procedure
Step 1
Remove the protective plastic from the camera lens and body.
Step 2
On the phone, remove the small plastic cover located on the topside of the phone display.
Step 3
With your phone idle (no calls), slide the camera USB connector (on the bottom of the camera) into the Phone
USB port (on the back of the phone display).
As you do this, pins on the underside of the camera fit into pinholes on the top of the phone display to further
stabilize the camera.
Cisco IP Phone 8811, 8841, 8845, 8851, 8851NR, 8861, and 8865 User Guide for Cisco Unified Communications Manager
11.0
117

Cisco PenTeleData 8800 Series Specifications

General

Brand	Cisco
Model	PenTeleData 8800 Series
Category	IP Phone
Language	English