EasyManuals Logo
Home>Cisco>Network Router>RV042G

Cisco RV042G User Manual

Cisco RV042G
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4 RV0xx Series Routers Quick Start Guide
Status Lights
1-4 (RV042 and
RV042G) or 1-8
(RV082 and RV016)
Use these numbered ports to connect computers
and other local network devices.
9-13 and 3-7 Dual
Function Ports
(RV016)
Use these numbered ports as LAN ports
(numbered 9-13) or configure them for use as
Internet ports (numbered 3-7). The status is
shown on the corresponding status lights: LAN/
Act 9-13 or Internet/Act 3-7.
Light Description
DIAG Lit—The router is preparing for use. Unlit—The
router is ready for use.
System SteadyThe router is powered on. Flashing—
The router is running a diagnostic test.
Internet (RV082,
RV042, RV042G) or
Internet 1-2 (RV016)
Steady—A device is connected to the Internet
port. Flashing—There is network activity over
the Internet port.
DMZ/Internet
(RV082, RV042,
RV042G) or DMZ
(RV016)
Steady—A device is connected to the DMZ/
Internet or DMZ port. Flashing—There is network
activity over the port.
DMZ Mode (RV082,
RV042, RV042G)
Lit—The DMZ/Internet port is configured as a
DMZ. Unlit—The DMZ/Internet port is configured
as a secondary Internet connection.
1-4, 1-8 SteadyA device is connected to the numbered
LAN port. Flashing—There is network activity
over the numbered port.
RV042G Gigabit
Ports
For the Internet, DMZ/Internet, and numbered
ports, the color indicates the speed. Green—
Gigabit. Amber10/100M.
RV016 Dual-Function Ports:
LAN/Act 9-13 Lit if the port is configured as a LAN port.
Steady—A device is connected to the port.
Flashing—There is network activity over the
port.
Internet/Act 3-7
(RV016)
Lit if the port is configured as an Internet port.
Steady—A device is connected to the port.
Flashing—There is network activity over the
port.
Port Description

Other manuals for Cisco RV042G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV042G and is the answer not in the manual?

Cisco RV042G Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
Ethernet LAN (RJ-45) ports6
Routing protocolsIP, RIP-1, RIP-2
Supported network protocolsPPTP, L2TP, IPSec, PPPoE, DHCP
VPN supportPPTP, Layer 2 Tunneling Protocol (L2TP), IPsec, Dead peer detection (DPD), Internet Key Exchange (IKE), split DNS, VPN backup
Firewall securityStateful packet inspection (SPI) firewall
Security algorithms3DES, 128-bit AES, 192-bit AES, 256-bit AES, DES, HTTPS, IPSEC
VPN tunnels quantity50
Authentication methodSHA-1, MD5
MAC address filtering-
CertificationFCC Class B, CE Class B, UL, cUL, CB
Input current1 A
Output voltage12 V
Storage temperature (T-T)0 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Product colorBlack
Rack mountingNo
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width130 mm
Height38.5 mm
Weight600 g

Related product manuals