Cisco RV042G User Manual

RV0xx Series Routers Quick Start Guide 5
Other Hardware Features
Default Settings
Feature Description
Reset The Reset button is an indented black button. On
the back panel of the RV042 and RV042G, look
for this button near the port labeled 1. On the front
panel of the RV082 and RV016, look for this
button near the Internet and DMZ ports .
• To restart the router or restore
connectivity: If the router is having problems
connecting to the Internet, use the tip of a pen
to press and hold the Reset button for one
second.
• To restore factory default settings: If you are
experiencing extreme problems with the
router and have tried all other troubleshooting
measures, press and hold the Reset button for
30 seconds to restore the factory default
settings. All previously entered settings will
be abandoned.
Security Slot Use the security slot on the side panel to attach a
lock to protect the router from theft.
Power
• RV042 and RV042G: Connect the provided
power adapter to the power port on the side
panel.
• RV082 and RV016: Connect the provided
AC power cable to the power port on the
back panel.
Parameter Default Value
Username admin
Password admin
LAN IP 192.168.1.1
DHCP Range 192.168.1.100 to 149
Netmask 255.255.255.0

Cisco RV042G Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Ethernet LAN (RJ-45) ports	6
Routing protocols	IP, RIP-1, RIP-2
Supported network protocols	PPTP, L2TP, IPSec, PPPoE, DHCP
VPN support	PPTP, Layer 2 Tunneling Protocol (L2TP), IPsec, Dead peer detection (DPD), Internet Key Exchange (IKE), split DNS, VPN backup
Firewall security	Stateful packet inspection (SPI) firewall
Security algorithms	3DES, 128-bit AES, 192-bit AES, 256-bit AES, DES, HTTPS, IPSEC
VPN tunnels quantity	50
Authentication method	SHA-1, MD5
MAC address filtering	-
Certification	FCC Class B, CE Class B, UL, cUL, CB
Input current	1 A
Output voltage	12 V
Storage temperature (T-T)	0 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Product color	Black
Rack mounting	No

Weight and Dimensions

Depth	200 mm
Width	130 mm
Height	38.5 mm
Weight	600 g