Cisco RV180 User Manual

Step 7. Choose the MAC Address Source from the drop-down list.
• Use Default Address— Uses the defaults MAC address.
• Use This Computer's Address— Uses the MAC address your computer currently has.
• Use this MAC— Allows you to enter a specific MAC Address.
Step 8. Click Save to save the changes.
L2TP Configuration
Step 1. Use the router configuration utility to choose Networking > WAN(Internet) > IPv4
WAN (internet). The IPv4 WAN (internet) page opens.

Cisco RV180 Specifications

General

WAN Ports	1
LAN Ports	4
VPN Support	Yes
Wireless Support	No
Firewall	Yes
Device Type	VPN Router
VPN Tunnels	10
Authentication	MD5, SHA1
Power Supply	12V DC, 1A
Encryption	3DES, AES
VPN Protocols	IPSec
Operating Temperature	0 to 40 °C
Storage Temperature	-20 to 70 °C
Humidity	10% to 85% non-condensing
Dimensions	130 x 130 x 35 mm
Weight	0.28 kg