To Next PageTo Next Page
Need help?Do you have a question about the Cisco SF 302-08MP and is the answer not in the manual?
General| Product Type | Managed Switch |
|---|---|
| Number of Ports | 8 |
| PoE Ports | 8 |
| PoE Power Budget | 62 W |
| PoE Budget | 62 W |
| Layer | Layer 2 |
| VLANs Supported | 256 |
| Power Supply | Internal |
| Ports | 8 x 10/100 + 2 x Gigabit SFP |
| Management Type | Web-based GUI |
| MAC Address Table Size | 8K |
| MAC Address Table | 8K entries |
| Jumbo Frame Support | 9216 bytes |
| Management | SNMP |
| Operating Temperature | 0 - 40 °C |
| Storage Temperature | -20 - 70 °C |
| Humidity | 10% to 90% (non-condensing) |
Configures system log settings, severity levels, aggregation, and remote SYSLOG servers.
Covers upgrading/backing up firmware, language files, and selecting the active boot image.
Details downloading/backing up configurations or logs, displaying file properties, and copying files.
Explains setting system time manually or dynamically, time zones, and DST.
Describes synchronizing the clock with SNTP servers and configuring authentication.
Explains integrated cable tests on copper cables using TDR and DSP-based methods.
Configures sending copied network packets from ports or VLANs to a monitoring connection.
Enables network managers to troubleshoot via LLDP, edit port settings, and manage network policies.
Configures global and per-port settings like jumbo frames, description, type, status, and speed/duplex.
Explains bundling physical ports into a single logical channel (LAG) for bandwidth and redundancy.
Explains PoE operation stages, modes, and properties like power limits and traps.
Configures PoE settings per port, including power limits, priority, and class.
Defines VLANs, explains tagged/untagged members, PVID, GVRP, and VLAN roles.
Covers creating VLANs, configuring VLAN interface settings (mode, PVID), and defining VLAN membership.
Assigns VoIP traffic to a specific VLAN and configures QoS, and manages Telephony OUIs.
Implements port-based network access control using 802.1x, including dynamic VLAN assignment and guest VLANs.
Prevents network attacks by filtering packets with specific IP parameters or known malicious content.
Outlines steps for configuring QoS, including modes, queues, bandwidth, DSCP/CoS mapping, and policies.
Uses policies, class maps, and policers for per-flow QoS, including DSCP remarking and aggregate policers.
Configures IPv4/IPv6 addresses, default routes, network settings, and HTTP/HTTPS services.
Manages firmware files, upgrades, backups, and selects the active boot image.
